Godspeed NYC Collection NYC Streetwear Staple

Godspeed Sizing and Fit: Getting It Right

Sizing is the costliest mistake you can make with this label, and the reason is structural, not carelessness. The label’s silhouette runs boxy and oversized-relaxed, so the garment already carries volume you did not ask for and normal sizing instincts no longer hold. Once you work out that you ordered wrong, the size you needed may not exist, because production runs are small. Given hoodies observed between $200 and $270 in 2026 market estimates, matching sets at $155 to $360, denim around $250 and cargo pants near $350, an error is not a small sum. Beginning with body measurements in both inches and centimetres, this guide works through each category. Having a tape measure nearby will make the rest of it work.

Start by Measuring Yourself

Measurements off your own body, not from a garment you already own, underpin every sound sizing decision. Most cases are resolved by chest and natural waist circumference, with sleeve and inseam handling the rest. Run the tape around the fullest part of the chest, with the tape level beneath the arms, allowing one finger of slack so nothing is squeezed. The waist goes above the hip bone and below the ribs, not where jeans usually sit. Heavyweight fleece can add two inches, or five centimetres, of false reading, so work over bare skin or a thin shirt. Write both units down, since product information circulates in both and converting under pressure is where errors creep in.

  1. Chest measurement: take the fullest point with the tape level and one finger of slack.
  2. Natural waist: between the hip bone and the ribs, with the stomach relaxed.
  3. Sleeve: run the tape from the centre back of the neck, along the shoulder, to the wrist bone.
  4. Length of the body: from the highest point of the shoulder to where you want the hem.
  5. Inseam: take it barefoot, crotch seam to floor, for a stacked leg.

The Reference Table

One caveat first: the table below translates body measurements into a starting letter size. These are general body-measurement speedoutlet.org bands, not an official chart published by the brand, and they provide a sensible starting point rather than a promise. A general table like this one is always outranked by a product page with its own garment measurements. Body measurements describe you and garment numbers describe the piece laid flat, so keep the two apart. The final column covers how each band reads once the boxy house cut is applied, which a standard chart never tells you. Use chest for tops, waist for bottoms, and read across rather than down.

Letter size Chest (in) Chest (cm) Waist (in) Waist (cm) How it reads in a boxy cut
S 35 to 37 89 to 94 28 to 30 71 to 76 Easy on a slim frame; short through the body
M 38 to 40 97 to 102 31 to 33 79 to 84 Broad across the chest, nearly true oversized
L 41 to 43 104 to 109 34 to 36 86 to 91 Full oversized look; sleeves run long
XL 44 to 46 112 to 117 37 to 39 94 to 99 Wide indeed; the length lags behind the width
2XL 47 to 49 119 to 124 40 to 42 102 to 107 Dominated by volume, so size up only for length
3XL 50 to 52 127 to 132 43 to 45 109 to 114 As wide as it goes, with shoulder drop worth checking closely

The Real Effect of a Boxy Cut

Wide relative to length is what boxy means, and that is not the same as being large. A conventional tee grows in chest and body length at once, so proportions stay roughly the same. On a boxy cut, width increases faster than length, so each step up makes the piece squarer rather than longer. Go up a size chasing length on a boxy godspeed shirt and you get a much wider garment and barely any more length. If you are tall, body length, not chest, is usually the limiting measurement. Check body length first and accept the width that comes with it once you pass roughly six foot two, or 188 centimetres.

The Size-Down Decision

Whether to size down is the most common question about god speed clothing, and it depends entirely on the look you want. Take your true size from the table and leave it there when the designed silhouette is the goal. Dropping one size normally gives a relaxed rather than obviously oversized fit on tops, if that is the look you want. Length in the body and the sleeve is the price, hardly an issue on a tee, quite visible on a hoodie. Take a size off a layering jacket and it no longer goes over fleece, which is why outerwear is the wrong place to size down. Only size down on tops, only by a single size, and only as a decision.

Heavyweight Fleece Hoodies

A godspeed hoodie is the clearest example of the way fabric weight changes sizing while thin material does not. Dense fleece stands off the body rather than draping, so it keeps its own shape and adds bulk beyond what it measures. Match the flat measurements exactly and the hoodie will still look larger than the lightweight sweatshirt. Pullovers and zip-through versions also behave differently, since a zip stiffens the front and reins in how much the body billows. Fleece tightens a little if washed hot, so choose the fit you want, then wash cold to keep it. Planning to wear it under a jacket? Size it to your body, because the outerwear is already generous.

T-Shirts and Layering Pieces

Tees are the most forgiving category and the cheapest place to learn how the sizing runs. In the $128 to $200 band according to 2026 market estimates, with most around $150 to $170, sleeveless near $170 and long sleeve near $200. The boxy cut shows most clearly here because there is no fabric weight to disguise it, so the shoulder seam drops past the shoulder point by design. Layered and long sleeve versions are cut a little closer through the body than the standard short-sleeve tee. The armhole on sleeveless pieces opens wider than most people expect, so sizing down is worth considering there. It is cheaper to buy two sizes of godspeed shirts and compare than one wrong guess on a $350 cargo pant.

Bottoms: Sweatpants, Cargos and Denim

For bottoms you use the waist column instead of the chest column, and they bring leg length in as a second variable. Matching-set sweatpants come cut relaxed and usually track true waist size without any adjustment. Cargo pants and premium denim are wider through the thigh and end in a flared or stacked hem, designed to pool over the shoe rather than break cleanly. A pair that looks too long on arrival is usually correct, and hemming removes the shape the pattern was built around. The denim observed around $250 is garment washed, and washed cotton gives at the waist as you wear it, so the tighter of two options often wins. Each half of a matching set deserves its own size.

Outerwear: Varsity, Moto and Puffer

Scarcity rather than construction makes outerwear the least forgiving category. Runs of 200 units with numbered authenticity tags were stated for the F.T.D and Chrome Seduction varsity jackets, so an exchange is not a realistic fallback. Vegan leather and vegan suede do not stretch, so on a varsity pairing a wool body with those sleeves, a snug sleeve on day one is a snug sleeve forever. Wool bodies are already cut to take a layer underneath, so use your true size instead of going up one for fleece. The leather moto gives less still, and whether it works at all comes down to the shoulders. The puffer is the exception; a slightly larger size is defensible there, since the insulation compresses.

The Mistakes Worth Avoiding

The same handful of assumptions, not bad luck, are behind most sizing failures. Without checking whether it was cut boxy or conventional, people compare against a garment they own. They go up a size for length on a cut where length hardly changes, or size down for a sharper line on a jacket that needs the space. Taking the waist at the trouser line or taking the waist at the trouser line puts people a full size out. A last group orders a matching set in one size from habit, then discovers the top fits and the bottoms do not. Almost all of this is prevented by the checks below.

  • Take the tape to your body rather than a favourite hoodie, and record both inches and centimetres.
  • Before trusting any general table, find the flat measurements on the product page itself.
  • Before you pick a size, decide whether you want intended oversized or relaxed.
  • Let body length be the limiting number when you are tall, not chest width.
  • Wool and vegan-leather outerwear should never be sized down, as there is no give to reclaim.
  • Both halves of a set get sized separately, and both need to be in stock.

Regina Root